Efficient energy use, sometimes simply called energy efficiency, is using less energy to provide the same level of energy service. For example, insulating a home allows a building to use less heating and cooling energy to achieve and maintain a comfortable temperature. Another example would be installing fluorescent lights and/or skylights instead of incandescent lights to attain the same level of illumination. Compact fluorescent lights use two-thirds less energy and may last 6 to 10 times longer than incandescent light bulbs. Efficient energy use is achieved primarily by means of a more efficient technology or processes rather than by changes in individual behaviour.
Energy efficient buildings, industrial processes and transportation could reduce the world's energy needs in 2050 by one third, and help controlling global emissions of greenhouse gases, according to the International Energy Agency.
Making homes, vehicles, and businesses more energy efficient is seen as a largely untapped solution to addressing the problems of pollution, global warming, energy security, and fossil fuel depletion. Many of these ideas have been discussed for years, since the 1973 oil crisis brought energy issues to the forefront. In the late 1970s, physicist Amory Lovins popularized the notion of a "soft energy path", with a strong focus on energy efficiency. Among other things, Lovins popularized the notion of negawatts—the idea of meeting energy needs by increasing efficiency instead of increasing energy production.
Energy efficiency has proved to be a cost-effective strategy for building economies without necessarily growing energy consumption, as environmental business strategist Joel Makower has noted. For example, the state of California began implementing energy-efficiency measures in the mid-1970s, including building code and appliance standards with strict efficiency requirements. During the following years, California's energy consumption has remained approximately flat on a per capita basis while national U.S. consumption doubled. As part of its strategy, California implemented a "loading order" for new energy resources that puts energy efficiency first, renewable electricity supplies second, and new fossil-fired power plants last.
Lovins' Rocky Mountain Institute points out that in industrial settings, "there are abundant opportunities to save 70% to 90% of the energy and cost for lighting, fan, and pump systems; 50% for electric motors; and 60% in areas such as heating, cooling, office equipment, and appliances." In general, up to 75% of the electricity used in the U.S. today could be saved with efficiency measures that cost less than the electricity itself. The same holds true for home-owners, leaky ducts have remained an invisible energy culprit for years. In fact, researchers at the US Department of Energy and their consortium, Residential Energy Efficient Distribution Systems (REEDS) have found that duct efficiency may be as low as 50-70%. The US Department of Energy has stated that there is potential for energy saving in the magnitude of 90 Billion kWh by increasing home energy efficiency. One way to combat duct inefficiency is by getting an AC tune-up.
Other studies have emphasized this. A report published in 2006 by the McKinsey Global Institute, asserted that "there are sufficient economically viable opportunities for energy-productivity improvements that could keep global energy-demand growth at less than 1 percent per annum"—less than half of the 2.2 percent average growth anticipated through 2020 in a business-as-usual scenario. Energy productivity, which measures the output and quality of goods and services per unit of energy input, can come from either reducing the amount of energy required to produce something, or from increasing the quantity or quality of goods and services from the same amount of energy.
The Vienna Climate Change Talks 2007 Report, under the auspices of the United Nations Framework Convention on Climate Change (UNFCCC), clearly shows "that energy efficiency can achieve real emission reductions at low cost."
Modern energy-efficient appliances, such as refrigerators, freezers, ovens, stoves, dishwashers, and clothes washers and dryers, use significantly less energy than older appliances. Current energy efficient refrigerators, for example, use 40 percent less energy than conventional models did in 2001. Following this, if all households in Europe changed their more than ten year old appliances into new ones, 20 billion kWh of electricity would be saved annually, hence reducing CO2 emissions by almost 18 billion kg. In the US, the corresponding figures would be 17 billion kWh of electricity and 27,000,000,000 lb (1.2×1010 kg) CO2. According to a 2009 study from McKinsey & Company the replacement of old appliances is one of the most efficient global measures to reduce emissions of greenhouse gases. Modern power management systems also reduce energy usage by idle appliances by turning them off or putting them into a low-energy mode after a certain time. Many countries identify energy-efficient appliances using an Energy Star label.
The impact of energy efficiency on peak demand depends on when the appliance is used. For example, an air conditioner uses more energy during the afternoon when it is hot. Therefore, an energy efficient air conditioner will have a larger impact on peak demand than off-peak demand. An energy efficient dishwasher, on the other hand, uses more energy during the late evening when people do their dishes. This appliance may have little to no impact on peak demand.
A building’s location and surroundings play a key role in regulating its temperature and illumination. For example, trees, landscaping, and hills can provide shade and block wind. In cooler climates, designing buildings with a south facing windows increases the amount of sun (ultimately heat energy) entering the building, minimizing energy use, by maximizing passive solar heating. Tight building design, including energy-efficient windows, well-sealed doors, and additional thermal insulation of walls, basement slabs, and foundations can reduce heat loss by 25 to 50 percent.
Dark roofs may become up to 39 C° (70 F°) hotter than the most reflective white surfaces, and they transmit some of this additional heat inside the building. US Studies have shown that lightly colored roofs use 40 percent less energy for cooling than buildings with darker roofs. White roof systems save more energy in sunnier climates. Advanced electronic heating and cooling systems can moderate energy consumption and improve the comfort of people in the building.
Proper placement of windows and skylights and use of architectural features that reflect light into a building, can reduce the need for artificial lighting. Increased use of natural and task lighting have been shown by one study to increase productivity in schools and offices. Compact fluorescent lights use two-thirds less energy and may last 6 to 10 times longer than incandescent light bulbs. Newer fluorescent lights produce a natural light, and in most applications they are cost effective, despite their higher initial cost, with payback periods as low as a few months.
Effective energy-efficient building design can include the use of low cost Passive Infra Reds (PIRs) to switch-off lighting when areas are unnoccupied such as toilets, corridors or even office areas out-of-hours. In addition, lux levels can be monitored using daylight sensors linked to the building's lighting scheme to switch on/off or dim the lighting to pre-defined levels to take into account the natural light and thus reduce consumption. Building Management Systems (BMS) link all of this together in one centralised computer to control the whole building's lighting and power requirements.
The choice of which space heating or cooling technology to use in buildings can have a significant impact on energy use and efficiency. For example, replacing an older 50% efficient natural gas furnace with a new 95% one will dramatically reduce energy use, carbon emissions, and winter natural gas bills. Ground source heat pumps can be even more energy efficient and cost effective. These systems use pumps and compressors to move refrigerant fluid around a thermodynamic cycle in order to "pump" heat against its natural flow from hot to cold, for the purpose of transferring heat into a building from the large thermal reservoir contained within the nearby ground. The end result is that heat pumps typically use four times less electrical energy to deliver an equivalent amount of heat than a direct electrical heater does. Another advantage of a ground source heat pump is that it can be reversed in summertime and operate to cool the air by transferring heat from the building to the ground. The disadvantage of ground source heat pumps is their high initial capital cost, but this is typically recouped within 5 to 10 years as a result of lower energy use.
Smart meters are slowly being adopted by the commerial sector to highlight to staff and for internal monitoring purposes the building's energy usage in a dynamic presentable format. The use of Power Quality Analysers can be introduced into an existing building to assess usage, harmonic distortion, peaks, swells and interruptions amongst others to ultimately make the building more energy-efficient. Often such meters communicate by using wireless sensor networks.
- Main article: Electrical energy efficiency on United States farms
In industry, when electricity is generated, the heat which is produced as a by-product can be captured and used for process steam, heating or other industrial purposes. Conventional electricity generation is about 30 percent efficient, whereas combined heat and power (also called co-generation) converts up to 90 percent of the fuel into usable energy.
Advanced boilers and furnaces can operate at higher temperatures while burning less fuel. These technologies are more efficient and produce fewer pollutants.
Over 45 percent of the fuel used by US manufacturers is burnt to make steam. The typical industrial facility can reduce this energy usage 20 percent (according to the US Department of Energy) by insulating steam and condensate return lines, stopping steam leakage, and maintaining steam traps.
Electric motors usually run on a constant flow of energy, but an adjustable speed drive can vary the motor’s energy output to match the load. This achieves energy savings ranging from 3 to 60 percent, depending on how the motor is used. Motor coils made of superconducting materials can also reduce energy losses. Motors may also benefit from voltage optimisation.
Many industries use compressed air for sand blasting, painting, or other tools. According to the US Department of Energy, optimizing compressed air systems by installing variable speed drives, along with preventive maintenance to detect and fix air leaks, can improve energy efficiency 20 to 50 percent.
The estimated energy efficiency for an automobile is 280 Passenger-Mile/106 Btu. There are several ways to enhance a vehicle's energy efficiency. Using improved aerodynamics to minimize drag can increase vehicle fuel efficiency. Reducing vehicle weight can also improve fuel economy, which is why composite materials are widely used in car bodies.
More advanced tires, with decreased tire to road friction and rolling resistance, can save gasoline. Fuel economy can be improved by up to 3.3% by keeping tires inflated to the correct pressure. Replacing a clogged air filter can improve a cars fuel consumption by as much as 10 percent on older vehicles. On newer vehicles (1980's and up) with fuel-injected, computer-controlled engines, a clogged air filter has no effect on mpg but replacing it may improve acceleration by 6-11 percent.
Energy-efficient vehicles may reach twice the fuel efficiency of the average automobile. Cutting-edge designs, such as the diesel Mercedes-Benz Bionic concept vehicle have achieved a fuel efficiency as high as 84 miles per US gallon (2.8 L/100 km; 101 mpg-imp), four times the current conventional automotive average..
The mainstream trend in automotive efficiency is the rise of electric vehicles (all@electric or hybrid electric). Hybrids, like the Toyota Prius, use regenerative braking to recapture energy that would dissipate in normal cars; the effect is especially pronounced in city driving. plug-in hybrids also have increased battery capacity, which makes it possible to drive for limited distances without burning any gasoline; in this case, energy efficiency is dictated by whatever process (coal-burning, hydroelectric, renewable source, etc) created the power. Plug-ins can typically drive for around 40 miles (64 km) purely on electricity without recharging; if the battery runs low, a gas engine kicks in allowing for extended range. Finally, all-electric cars are also growing in popularity; the Tesla Roadster sports car is the only high-performance all-electric car currently on the market, and others are in preproduction.
- Main article: Energy conservation
Energy conservation is broader than energy efficiency in that it encompasses using less energy to achieve a lesser energy service, for example through behavioural change, as well as encompassing energy efficiency. Examples of conservation without efficiency improvements would be heating a room less in winter, driving less, or working in a less brightly lit room. As with other definitions, the boundary between efficient energy use and energy conservation can be fuzzy, but both are important in environmental and economic terms. This is especially the case when actions are directed at the saving of fossil fuels.
- Main article: Sustainable energy
Energy efficiency and renewable energy are said to be the “twin pillars” of a sustainable energy policy. Both strategies must be developed concurrently in order to stabilize and reduce carbon dioxide emissions. Efficient energy use is essential to slowing the energy demand growth so that rising clean energy supplies can make deep cuts in fossil fuel use. If energy use grows too rapidly, renewable energy development will chase a receding target. Likewise, unless clean energy supplies come online rapidly, slowing demand growth will only begin to reduce total carbon emissions; a reduction in the carbon content of energy sources is also needed. A sustainable energy economy thus requires major commitments to both efficiency and renewables.
If the demand for energy services remains constant, improving energy efficiency will reduce energy consumption and carbon emissions. However, many efficiency improvements do not reduce energy consumption by the amount predicted by simple engineering models. This is because they make energy services cheaper, and so consumption of those services increases. For example, since fuel efficient vehicles make travel cheaper, consumers may choose to drive further and/or faster, thereby offsetting some of the potential energy savings. This is an example of the direct rebound effect.
Estimates of the size of the rebound effect range from roughly 5% to 40%. The rebound effect is likely to be less than 30% at the household level and may be closer to 10% for transport. A rebound effect of 30% implies that improvements in energy efficiency should achieve 70% of the reduction in energy consumption projected using engineering models.
Since more efficient (and hence cheaper) energy will also lead to faster economic growth, there are suspicions that improvements in energy efficiency may eventually lead to even faster resource use. This was postulated by economists in the 1980s and remains a controversial hypothesis. Ecological economists have suggested that any cost savings from efficiency gains be taxed away by the government in order to avoid this outcome.
Organizations promoting energy efficiencyEdit
- European Council for an Energy Efficient Economy*UK Envirowise Portal
- Europe's Energy Portal
- Orgalime, the European engineering industries association
- Save Power
- Department of Climate Change and Energy Efficiency
- Department of the Environment, Water, Heritage and the Arts
- Alliance to Save Energy
- American Council for an Energy-Efficient Economy (ACEEE)
- Consortium for Energy Efficiency
- Energy Star, from United States Environmental Protection Agency
- Industrial Assessment Center
- Institute for Electric Efficiency
- Institute for Building Efficiency
- National Electrical Manufacturers Association
- North American Council for Freight Efficiency (NACFE)
- Rocky Mountain Institute
- Building Energy Codes Program (in the US)
- Building Codes Assistance Project
- Data center infrastructure efficiency
- Electric vehicle#Efficiency
- Energy audit
- Energy policy
- Energy recovery
- Energy resilience
- Performance per watt
- Green energy
- Home performance
- International Partnership for Energy Efficiency Cooperation
- National Energy Action
- Negawatt power
- One watt initiative
- Passenger miles per gallon
- Renewable heat
- Standby power
- Sustainable House Day (in Australia)
- World Sustainable Energy Days
- ↑ "Philips Tornado Asian Compact Fluorescent". Philips. http://www.lamptech.co.uk/Spec%20Sheets/Philips%20CFL%20Tornado.htm. Retrieved 2007-12-24.
- ↑ Diesendorf, Mark (2007). Greenhouse Solutions with Sustainable Energy, UNSW Press, p. 86.
- ↑ Invest in clean technology says IEA report
- ↑ The Twin Pillars of Sustainable Energy: Synergies between Energy Efficiency and Renewable Energy Technology and Policy
- ↑ Implementing California's Loading Order for Electricity Resources
- ↑ http://www.greencollaroperations.com/weatherization-austin-tx.html
- ↑ Microsoft Word - 20070831_vienna_closing_press_release.doc
- ↑ http://www.electrolux.com/ecosavings
- ↑ http://www.electrolux.com/ecosavings_us
- ↑ McKinsey & Company (2009). Pathway to a Low-Carbon Economy : Version 3 of the Global Greenhouse Gas Abatement Cost Curve, p. 7.
- ↑ 11.0 11.1 11.2 11.3 Energy-Efficient Buildings: Using whole building design to reduce energy consumption in homes and offices
- ↑ The impact of energy efficiency on peak demand
- ↑ CFL savings calculator, Green Energy Efficient Homes
- ↑ Creating Energy Efficient Offices - Electrical Contractor Fit-out Article
- ↑ Wireless smart meter by ecowizard
- ↑ 16.0 16.1 16.2 16.3 16.4 Industrial Energy Efficiency: Using new technologies to reduce energy use in industry and manufacturing
- ↑ Richard C. Dorf, The Energy Factbook, McGraw-Hill, 1981
- ↑ http://www.fueleconomy.gov/feg/maintain.shtml
- ↑ 19.0 19.1 Automotive Efficiency: Using technology to reduce energy use in passenger vehicles and light trucks
- ↑ http://www.fueleconomy.gov/feg/pdfs/Air_Filter_Effects_02_26_2009.pdf
- ↑ 
- ↑ Diesendorf, Mark (2007). Greenhouse Solutions with Sustainable Energy, UNSW Press, p. 87.
- ↑ The Twin Pillars of Sustainable Energy: Synergies between Energy Efficiency and Renewable Energy Technology and Policy (American Council for an Energy-Efficient Economy)
- ↑ 24.0 24.1 The Rebound Effect: an assessment of the evidence for economy-wide energy savings from improved energy efficiency pp. v-vi.
- ↑ Greening, Lorna; David L. Greene, Carmen Difiglio (2000), "Energy efficiency and consumption—the rebound effect—a survey.", Energy Policy 28: 389–401
- ↑ "The Effect of Improved Fuel Economy on Vehicle Miles Traveled: Estimating the Rebound Effect Using U.S. State Data, 1966-2001". University of California Energy Institute: Policy & Economics. September 21, 2005. http://repositories.cdlib.org/ucei/policy/EPE-014. Retrieved 2007-11-23.
- ↑ "Energy Efficiency and the Rebound Effect: Does Increasing Efficiency Decrease Demand?". http://www.ncseonline.org/nle/crsreports/energy/eng-80.cfm?&CFID=11262148&CFTOKEN=7028302. Retrieved 2007-11-21.
- ↑ Wackernagel, Mathis and William Rees, 1997, "Perpetual and structural barriers to investing in natural capital: economics from an ecological footprint perspective." Ecological Economics, Vol.20 No.3 p3-24.
This page is being imported from Wikipedia, to create a Wikidwelling stub or article. These steps need to be completed: