Resin

Not to be confused with Rosin.

Template:This

Extremely viscous resin extruding from the trunk of a mature Araucaria columnaris at Hooghly near Bandel in West Bengal, India.

Insect trapped in resin.

Resin of a pine

Resin is a hydrocarbon secretion of many plants, particularly coniferous trees. It is valued for its chemical properties and associated uses, such as the production of varnishes, adhesives, and food glazing agents; as an important source of raw materials for organic synthesis; and as constituents of incense and perfume. In perfumery such products are often termed "ambered", based on Fossilized resins being the source of the gemstone amber. Resins are also a material in nail polish.

The term also encompasses synthetic substances of similar properties, as well as shellacs of insects of the superfamily Coccoidea. Resins have a very long history that is documented in ancient Greece Theophrastus, ancient Rome Pliny the Elder, and especially as the forms known as frankincense and myrrh in ancient Egypt. They were highly prized substances, and required as incense in religious rites.

There is no consensus on why plants secrete resins. However, resins consist primarily of secondary metabolites or compounds that apparently play no role in the primary physiology of a plant. While some scientists view resins only as waste products, their protective benefits to the plant are widely documented. The toxic resinous compounds may confound a wide range of herbivores, insects, and pathogens; while the volatile phenolic compounds may attract benefactors such as parasitoids or predators of the herbivores that attack the plant.

Chemistry

The resin produced by most plants is a viscous liquid, composed mainly of volatile fluid terpenes, with lesser components of dissolved non-volatile solids which make resin thick and sticky. The most common terpenes in resin are the bicyclic terpenes alpha-pinene, beta-pinene, delta-3 carene and sabinene, the monocyclic terpenes limonene and terpinolene, and smaller amounts of the tricyclic sesquiterpenes, longifolene, caryophyllene and delta-cadinene. Some resins also contain a high proportion of resin acids. The individual components of resin can be separated by fractional distillation

A few plants produce resins with different compositions, most notably Jeffrey Pine and Gray Pine, the volatile components of which are largely pure n-heptane with little or no terpenes. The exceptional purity of the n-heptane distilled from Jeffrey Pine resin, unmixed with other isomers of heptane, led to its being used as the defining zero point on the octane rating scale of petrol quality. Because heptane is highly flammable, distillation of resins containing it is very dangerous. Some resin distilleries in California exploded because they mistook Jeffrey Pine for the similar but terpene-producing Ponderosa Pine. At the time the two pines were considered to be the same species of pine; they were only classified as separate species in 1853.

Some resins when soft are known as 'oleoresins', and when containing benzoic acid or cinnamic acid they are called balsams. Other resinous products in their natural condition are a mix with gum or mucilaginous substances and known as gum resins. Many compound resins have distinct and characteristic odors, from their admixture with essential oils.

Certain resins are obtained in a fossilized condition, amber being the most notable instance of this class; African copal and the kauri gum of New Zealand are also procured in a semi-fossil condition.

Derivatives

Cedar of Lebanon pine cone showing flecks of resin as used in the mummification of Egyptian Pharaohs.

Solidified resin from which the volatile terpene components have been removed by distillation is known as rosin. Typical rosin is a transparent or translucent mass, with a vitreous fracture and a faintly yellow or brown colour, non-odorous or having only a slight turpentine odour and taste.

It is insoluble in water, mostly soluble in alcohol, essential oils, ether and hot fatty oils, and softens and melts under the influence of heat, is not capable of sublimation, and burns with a bright but smoky flame.

This comprises a complex mixture of different substances including organic acids named the resin acids. These are closely related to the terpenes, and derive from them through partial oxidation. Resin acids can be dissolved in alkalis to form resin soaps, from which the purified resin acids are regenerated by treatment with acids. Examples of resin acids are abietic acid (sylvic acid), C₂₀H₃₀O₂, plicatic acid contained in cedar, and pimaric acid, C₂₀H₃₅O₂, a constituent of galipot resin. Abietic acid can also be extracted from rosin by means of hot alcohol; it crystallizes in leaflets, and on oxidation yields trimellitic acid, isophthalic acid and terebic acid. Pimaric acid closely resembles abietic acid into which it passes when distilled in a vacuum; it has been supposed to consist of three isomers.

Synthetic resins

Main article: plastic

Synthetic resins are materials with similar properties to natural resins—viscous liquids capable of hardening. They are typically manufactured by esterification or soaping of organic compounds. The classic variety is epoxy resin, manufactured through polymerization-polyaddition or polycondensation reactions, used as a thermoset polymer for adhesives and composites. Epoxy resin is two times stronger than concrete, seamless and waterproof. Accordingly, it has been mainly in use for industrial flooring purposes since the 1960s. Since 2000, however, epoxy and polyurethane resins are used in interiors as well, mainly in Western Europe.

One more category, which constitutes 75% of resins used, is unsaturated polyester resin. Ion exchange resin is another important class with application in water purification and catalysis of organic reactions. See also AT-10 resin, melamine resin. Another synthetic polymer is also sometimes called by the same suffix, acetal resin. By contrast with the other synthetics, however, it has a simple chain structure with the repeat unit of form -[CH₂O]-.

Uses

Lumps of dried Frankincense resin

The hard transparent resins, such as the copals, dammars, mastic and sandarac, are principally used for varnishes and cement, while the softer odoriferous oleo-resins (frankincense, elemi, turpentine, copaiba) and gum resins containing essential oils (ammoniacum, asafoetida, gamboge, myrrh, and scammony) are more largely used for therapeutic purposes and incense.

Resin in the form of rosin is applied to the bows of stringed instruments (e.g. violin, rebec, erhu, sarangi, etc), because of its quality for adding friction to the hair. Ballet dancers may apply crushed rosin to their shoes to increase grip on a slippery floor.

Resin has also been used as a medium for sculpture by artists such as Eva Hesse, and in other types of artwork.

In the early 1990s, most bowling ball manufacturers started adding resin particles to the covers of bowling balls. Resin makes a bowling ball tackier than it would otherwise be, increasing its ability to hook into the pins at an angle and (with correct technique) making strikes easier to achieve.^{[citation needed]}

See also

• Amber - fossilized resin
• Biodegradable
• Kino (plant) - a plant gum similar to resin
• Mastic (plant resin) - resin from the Pistacia lentiscus tree
• Pitch (resin)
• Polyresin - a hard, synthetic resin for casting in molds
• Resin casting
• Resin extraction
• Rosin - a solid form of natural resin

References

ar:راتنج gn:Mangaysy bg:Смола ca:Resina cs:Pryskyřice da:Harpiks de:Harz (Material) es:Resina eo:Rezino fr:Résine (végétale) ko:수지 hr:Smola io:Rezino is:Trjákvoða it:Resina vegetale he:שרף lt:Sakai hu:Gyanta nl:Hars ja:天然樹脂 no:Harpiks nn:Kvae pl:Żywica pt:Resina ro:Rășină naturală ru:Древесная смола simple:Resin sk:Živica sr:Смола fi:Pihka sv:Kåda tl:Sahing (katas ng puno) ta:பிசின் tr:Reçine uk:Живиця zh-yue:樹脂 zh:树脂