Technical drawing

988pages on
this wiki
Add New Page
Talk0 Share
Drafter at work

Drafter at work.

Bundesarchiv B 145 Bild-F038800-0010, Wolfsburg, VW Autowerk

Copying technical drawings in 1973

Technical drawing, also known as drafting, is the academic discipline of creating standardized technical drawings by architects, interior designers, drafters, design engineers, and related professionals. Standards and conventions for layout, line thickness, text size, symbols, view projections, descriptive geometry, dimensioning, and notation are used to create drawings that are ideally interpreted in only one way.

A person who does drafting is known as a drafter. In some areas this person may be referred to as a drafting technician, draftsperson, or draughtsman. This person creates technical drawings which are a form of specialized graphic communication. A technical drawing differs from a common drawing by how it is interpreted. A common drawing can hold many purposes and meanings, while a technical drawing is intended to concisely and clearly communicate all needed specifications to transform an idea into physical form.[1]


Architekturskizze Verwaltungsgebäude Biel

Sketch for a government building.


A sketch is a quickly executed freehand drawing that is not intended as a finished work. In general, a sketch is a quick way to record an idea for later use. Architect's sketches primarily serve as a way to try out different ideas and establish a composition before undertaking a more finished work, especially when the finished work is expensive and time consuming.

Architectural sketches, for example, are a kind of diagrams.[2] These sketches, like metaphors, are used by architects as a mean of communication in aiding design collaboration. This tool helps architects to abstract attributes of hypothetical provisional design solutions and summarize their complex patterns, hereby enhancing the design process.[2]

Manual or by instrumentEdit


A drafting table.

Technical drawing instruments 1

Technical drawing instruments.


Stencils for correct technical lettering.

The basic drafting procedure is to place a piece of paper (or other material) on a smooth surface with right-angle corners and straight sides—typically a drafting table. A sliding straightedge known as a T-square is then placed on one of the sides, allowing it to be slid across the side of the table, and over the surface of the paper.

"Parallel lines" can be drawn simply by moving the T-square and running a pencil or technical pen along the T-square's edge, but more typically the T-square is used as a tool to hold other devices such as set squares or triangles. In this case the drafter places one or more triangles of known angles on the T-square—which is itself at right angles to the edge of the table—and can then draw lines at any chosen angle to others on the page. Modern drafting tables (which have by now largely been replaced by CAD workstations) come equipped with a drafting machine that is supported on both sides of the table to slide over a large piece of paper. Because it is secured on both sides, lines drawn along the edge are guaranteed to be parallel.

In addition, the drafter uses several tools to draw curves and circles. Primary among these are the compasses, used for drawing simple arcs and circles, and the French curve, typically a piece of plastic with complex curves on it. A spline is a rubber coated articulated metal that can be manually bent to most curves.

Drafting templates assist the drafter with creating recurring objects in a drawing without having to reproduce the object from scratch every time. This is especially useful when using common symbols; i.e. in the context of stagecraft, a lighting designer will typically draw from the USITT standard library of lighting fixture symbols to indicate the position of a common fixture across multiple positions. Templates are sold commercially by a number of vendors, usually customized to a specific task, but it is also not uncommon for a drafter to create their own templates.

This basic drafting system requires an accurate table and constant attention to the positioning of the tools. A common error is to allow the triangles to push the top of the T-square down slightly, thereby throwing off all angles. Even tasks as simple as drawing two angled lines meeting at a point require a number of moves of the T-square and triangles, and in general drafting can be a time consuming process.

A solution to these problems was the introduction of the mechanical "drafting machine", an application of the pantograph (sometimes referred to incorrectly as a "pentagraph" in these situations) which allowed the drafter to have an accurate right angle at any point on the page quite quickly. These machines often included the ability to change the angle, thereby removing the need for the triangles as well.

In addition to the mastery of the mechanics of drawing lines, arcs and circles (and text) onto a piece of paper—with respect to the detailing of physical objects—the drafting effort requires a thorough understanding of geometry, trigonometry and spatial comprehension, and in all cases demands precision and accuracy, and attention to detail of high order.

Although drafting is sometimes accomplished by a project engineer, architect—or even by shop personnel such as a machinist—skilled drafters (and/or designers) usually accomplish the task and are always in demand to some level.

Cad crank

An oblique view of a four-cylinder inline crankshaft with pistons.

Computer Aided DesignEdit

Main article: Computer Aided Design

Today, the mechanics of the drafting task have largely been automated and accelerated through the use of Computer Aided Design systems (CAD).

There are two types of Computer Aided Design systems (CAD) used for the production of technical drawings, two dimensions ("2D") and three dimensions ("3D").

2D CAD systems such as AutoCAD replace the paper drawing discipline. The lines, circles, arcs and curves are created within the software. It is down to the technical drawing skill of the user to produce the drawing. There is still much scope for error in the drawing when producing first and third angle orthographic projections, auxiliary projections and cross sections. A 2D CAD system is merely an electronic drawing board. Its greatest strength over direct to paper technical drawing is in the making of revisions. Where as in a conventional hand drawn technical drawing, if a mistake is found, or a modification is required, a new drawing must be made from scratch. The 2D CAD system allows a copy of the original to be modified saving considerable time. 2D CAD systems can be used to create plans for large projects such as buildings and aircraft but provide no way to check the various components will fit together.

3D CAD systems such as Pro/ENGINEER first produce the geometry of the part, the technical drawing comes from user defined views of the part. Any orthographic, projected and section views are created by the software. There is no scope for error in the production of these views. The main scope for error comes in setting the parameter of first or third angle projection, and displaying the relevant symbol on the technical drawing. 3D CAD allows individual parts to be assembled together to represent the final product. Buildings, Aircraft, ships and cars are modeled, assembled and checked in 3D before technical drawings are released for manufacture.

Both 2D and 3D CAD systems can be used to produce technical drawings for any discipline. The various disciplines; electical, electronic, pneumatic, fluidic, etc., have industry recognised symbols to represent common components.

BS and ISO produce standards to show recommended practices but it is up to individuals to produce the drawings. There is no definitive standard for layout or style. The only standard across engineering workshop drawings is in the creation of orthographic projections and cross section views.

Drafting can represent two dimensions ("2D") and three dimensions ("3D") although the representation itself is always created in 2D (cf. Architectural model). Drafting is the integral communication of technical or engineering drawings and is the industrial arts sub-discipline that underlies all involved technical endeavors.

In representing complex, three-dimensional objects in two-dimensional drawings, the objects can be described by at least one view plus material thickness note, 2, 3 or as many views and sections that are required to show all features of object.

Applications for technical drawingEdit


Main article: Architectural drawing

The art and design that goes into making buildings is known as architecture. To communicate all aspects of the design, detailed drawings are used. In this field, the term plan is often used when referring to the full section view of these drawings.[3] Architectural drawings describe and document an architect's design.[4]

DIN 69893 hsk 63a drawing

Engineering drawing of a Machine tool part.


Main article: Engineering drawing

Engineering can be a very broad term. It stems from the Latin ingenerare, meaning "to create".[5] Because this could apply to everything that humans create, it is given a narrower definition in the context of technical drawing. Engineering drawings generally deal with mechanical engineered items, such as manufactured parts and equipment.

Engineering drawings are usually created in accordance with standardized conventions for layout, nomenclature, interpretation, appearance (such as typefaces and line styles), size, etc.

Its purpose is to accurately and unambiguously capture all the geometric features of a product or a component. The end goal of an engineering drawing is to convey all the required information that will allow a manufacturer to produce that component.

Wright brothers patent plans 1908

Wright brothers Patent drawing, 1908.


Main article: Patent drawing

The applicant for a patent will be required by law to furnish a drawing of the invention whenever the nature of the case requires a drawing to understand the invention. This drawing must be filed with the application. This includes practically all inventions except compositions of matter or processes, but a drawing may also be useful in the case of many processes.[6]

The drawing must show every feature of the invention specified in the claims, and is required by the patent office rules to be in a particular form. The Office specifies the size of the sheet on which the drawing is made, the type of paper, the margins, and other details relating to the making of the drawing. The reason for specifying the standards in detail is that the drawings are printed and published in a uniform style when the patent issues, and the drawings must also be such that they can be readily understood by persons using the patent descriptions.[6]

Related fieldsEdit

Drum set

Illustration of a drum set.

Technical illustrationsEdit

Technical illustration is the use of illustration to visually communicate information of a technical nature. Technical illustrations can be component technical drawings or diagrams. The aim of technical illustration is "to generate expressive images that effectively convey certain information via the visual channel to the human observer".[7]

The main purpose of technical illustration is to describe or explain these items to a more or less nontechnical audience. The visual image should be accurate in terms of dimensions and proportions, and should provide "an overall impression of what an object is or does, to enhance the viewer’s interest and understanding".[8]

According to Viola (2005) "illustrative techniques are often designed in a way that even a person with no technical understanding clearly understands the piece of art. The use of varying line widths to emphasize mass, proximity, and scale helped to make a simple line drawing more understandable to the lay person. Cross hatching, stippling, and other low abstraction techniques gave greater depth and dimension to the subject matter".[7]

1942 Nash Ambassador X-ray

Cutaway drawing of a Nash 600.

A cutaway drawing is a technical illustration, in which surface elements a three-dimensional model are selectively removed, to make internal features visible, but without sacrificing the outer context entirely.

The purpose of a cutaway drawing is to "allow the viewer to have a look into an otherwise solid opaque object. Instead of letting the inner object shine through the surrounding surface, parts of outside object are simply removed. This produces a visual appearance as if someone had cutout a piece of the object or sliced it into parts. Cutaway illustrations avoid ambiguities with respect to spatial ordering, provide a sharp contrast between foreground and background objects, and facilitate a good understanding of spatial ordering".[9]

Technical drawings (the document)Edit

Types of technical drawingsEdit

The two types of technical drawings are based on graphical projection.[1] This is used to create an image of a three-dimensional object onto a two-dimensional surface.

Two-dimensional representationEdit

Two-dimensional representation uses orthographic projection to create an image where only two of the three dimensions of the object are seen.

Three-dimensional representationEdit

In three-dimensional representation, also referred to as pictorials, all three dimensions, of the three dimensions of an object, are visible.



Main article: Multiview orthographic projection

Multiview is a type of orthographic projection. There are two conventions for using multiview, first-angle and third-angle. In both cases, the front or main side of the object is the same. First-angle is drawing the object sides based on where they land. Example, looking at the front side, rotate the object 90 degrees to the right. What is seen will be drawn to the right of the front side. Third-angle is drawing the object sides based on where they are. Example, looking at the front side, rotate the object 90 degrees to the right. What is seen is actually the left side of the object and will be drawn to the left of the front side


While multiview relates to external surfaces of an object, section views show an imaginary plane cut through an object. This is often useful to show voids in an object.


Auxiliary views utilize an additional projection plane other than the common planes in a multiview. Since the features of an object need to show the true shape and size of the object, the projection plane must be parallel to the object surface. Therefore, any surface that is not in line with the three major axis needs its own projection plane to show the features correctly.


Patterns, sometimes called developments, show the size and shape of a flat piece of material needed for later bending or folding into a three dimensional shape.[10]

Gear pump exploded

Gear pump exploded view.


An exploded view drawing is a technical drawing of an object that shows the relationship or order of assembly of the various parts.[6] It shows the components of an object slightly separated by distance, or suspended in surrounding space in the case of a three-dimensional exploded diagram. An object is represented as if there had been a small controlled explosion emanating from the middle of the object, causing the object's parts to be separated an equal distance away from their original locations.

An exploded view drawing (EVD) can show the intended assembly of mechanical or other parts. In mechanical systems usually the component closest to the center is assembled first, or is the main part in which the other parts get assembled. This drawing can also help to represent disassembly of parts, where the parts on the outside normally get removed first.[11]

Standards and conventionsEdit

Basic drafting paper sizesEdit

Main article: Paper size

There have been many standard sizes of paper at different times and in different countries, but today there are two widespread systems in use: the international standard (A4 and its siblings) and the North American sizes.

Sets of technical drawingsEdit

Working drawingsEdit

Working drawings are the set of technical drawings used during the manufacturing phase of a product.[12] In architecture, these typically include civil drawings, architectural drawings, structural drawings, mechanical systems drawings, electrical drawings, and plumbing drawings.

Assembly drawingsEdit

Assembly drawings show how different parts go together, identify those parts by number, and have a parts list, often referred to as a bill of materials.[13]

See alsoEdit

References Edit

  1. 1.0 1.1 Goetsch, David L; Chalk, William S; Nelson, John A (2000), Technical Drawing (4th ed.), Albany, NY: Delmar, ISBN 076680531X p. 3
  2. 2.0 2.1 Richard Boland and Fred Collopy (2004). Managing as designing. Stanford University Press, 2004. ISBN 0804746745, p.69.
  3. Jefferis, Alan; Madsen, David (2005), Architectural Drafting and Design (5th ed.), Clifton Park, NY: Delmar Cengage Learning, ISBN 1401867154
  4. Goetsch et al. (2000) p. 792
  5. Lieu, Dennis K; Sorby, Sheryl (2009), Visualization, Modeling, and Graphics for Engineering Design (1st ed.), Clifton Park, NY: Delmar Cengage Learning, ISBN 1401842496 , p. 1-2
  6. 6.0 6.1 6.2 United States Patent and Trademark Office (2005) General Information Concerning Patents § 1.84 Standards for drawings (Revised January 2005). Accessed 13 Feb 2009.
  7. 7.0 7.1 Ivan Viola and Meister E. Gröller (2005). "Smart Visibility in Visualization". In: Computational Aesthetics in Graphics, Visualization and Imaging. L. Neumann et al. (Ed.)
  8. The Role of the Technical Illustrator in Industry webarticle, Last modified: Juni 15, 2002. Accessed 15 feb 2009.
  9. J. Diepstraten, D. Weiskopf & T. Ertl (2003). "Interactive Cutaway Illustrations". in: Eurographics 2003. P. Brunet and D. Fellner (ed). Vol 22 (2003), Nr 3.
  10. Goetsch et al. (2000), p. 341
  11. Michael E. Brumbach, Jeffrey A. Clade (2003). Industrial Maintenance. Cengage Learning, 2003 ISBN 0766826953, p.65
  12. Ralph W. Liebing (1999). Architectural working drawings. John Wiley and Sons, 1999. ISBN 0471348767.
  13. Goetsch et al. (2000), p. 613

Further reading Edit

  • K.N.Anilkumar(2010)'engineering graphics with animated CD'anpublishers,kerala

  • Peter J. Booker (1963). A History of Engineering Drawing. London: Northgate.
  • Franz Maria Feldhaus (1963). The History of Technical Drawing
  • Wolfgang Lefèvre ed. (2004). Picturing Machines 1400-1700 : How technical drawings shaped early engineering practice. MIT Press, 2004. ISBN 0262122693

External linksEdit

Template:Visualizationar:رسم صناعي ca:Dibuix tècnic cs:Technický výkres de:Technisches Zeichnen es:Dibujo técnico eo:Teknika desegnado eu:Marrazketa teknikoa fa:رسم فنی fr:Dessin technique gl:Debuxo técnico hi:तकनीकी चित्रण it:Disegno tecnico he:שרטוט טכני ka:ხაზვა lt:Braižyba ms:Lukisan teknik nl:Technisch tekenen ja:製図 pl:Rysunek techniczny pt:Desenho técnico ru:Черчение sk:Technický výkres fi:Tekninen piirtäminen ta:தொழில்நுட்ப வரைதல் tr:Teknik resim uk:Креслення vi:Bản vẽ kỹ thuật zh:工程制图

Ad blocker interference detected!

Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.