Fandom

Wikidwelling

Tent peg

988pages on
this wiki
Add New Page
Talk0 Share
Zeltnagel2

A simple wire rod tent peg

A tent peg is a spike, usually with a hook or hole on the top end, typically made from wood, metal, plastic, or composite material, pushed or driven into the ground for holding a tent to the ground, either directly by attaching to the tent's material, or by connecting to ropes attached to the tent. Traditionally, a tent peg is improvised from a section of a small tree branch, if possible with a small side branch cut off to leave a hook, driven into the ground narrower end first.
Wooden stake holding guy rope

A wooden stake supporting a tent.

Tent peg useEdit

Tent peg delta type

Delta Peg

A tent will typically be pegged to the ground by a combination of both direct attachment to the tent's material and via ropes.

Tent pegs are used to help maintain the tent's shape, and to hold the tent in place against wind.

Tent pegs are preferably pushed into the ground by hand. However, hard ground, or bigger tent pegs, will require a tent peg mallet to drive them into the ground.

A tent peg provides the greatest holding ability when it is inserted into the ground so that the point of attachment of the rope is at ground level. This minimises the rope's ability to apply leverage to the tent peg, which can loosen or pull the tent peg from the ground.

Above, the emphasis is on leverage and in recent years a new type of tent peg has been developed which eliminates leverage.The addition of an arm at the top of the peg enables the tension to be directed to a point beneath the ground where the soil is firm. The peg is 'balanced' with little or no leverage (moment). This new peg style presents a greater surface area to resist tension in guys. The Delta peg shape is the first major design change in tent pegs in hundreds of years. Delta pegs lay totally level with the soil offering maximum 'safety-in-the-field'.[citation needed]

Types of tent pegsEdit

Tent pegs come in wide variety of shapes, sizes, and materials.

Heringe

A variety of tent pegs.

The type of tent peg best suited to a tent will be determined by several factors, such as:

  • the type of ground where the tent is to be used, for example, snow, soft soil, sand, hard or rocky soil, etc., and hence the gripping or holding strength of the ground versus the ease of penetrating the ground
  • the size of the tent, and hence the weight of material to be kept in shape, and the wind load
  • the weather conditions when the tent is to be used, primarily affecting the wind load on the tent
  • the weight of the tent peg, bearing on the ability for the tent to be transported, often in backpacks

Characteristics of tent pegsEdit

Better quality tent pegs will have symmetrical tips, either conical or "V" shaped, to ensure that they can be driven into the ground without veering off alignment[1]. They will also typically have hook extensions to allow the end of the hook to be also driven into the ground, providing a second ground contact point, to reduce the risk that the peg may turn in the ground under tension and allow the rope it is holding to slip off the hook[1][2].

Other styles of tent pegs have fully formed eyes through which the rope is passed so that the rope cannot come off the peg no matter in which direction the peg is orientated. The new Delta shape peg always points toward the tent and can never turn. The guy is partially buried and cannot slip off the hook. Delta shaped pegs lie level with the soil offering maximum safety.

Hering klein

A light gauge pressed metal tent peg, with rope and mallet.

Hering gross

A heavy gauge pressed metal tent peg, with heavire rope and metal hatchet used as a mallet.

Some types of tent pegs are made from flat material pressed in to a shallow "V" shape cross section.[3] This type of tent peg relies on the broadness of the section to not turn under tension.

Tent peg types and styles may typically vary in length from 150mm to 490mm, and in thickness from 1.6mm to 3.2mm for flat section tent pegs and from 4mm to 11.2mm for wire rod[2][4][5] tent pegs. Smaller wire tent pegs are also available, especially where weight is critical.
Zeltnagel

A wire rod tent peg, with rope and mallet.

Tältspik

A range of tent peg profiles.

Hering rot

A narrower plastic tent peg in softer soil, with rope and mallet.

Plastic tent pegs are typically very wide and longer than metal pegs, and are used for softer ground types, sand and light soils.[5][6][7]

Heavy duty tent pegs may be made from angle iron from 2.5mm to 5mm thick, and have the hook welded into the open side of the angle, meaning that the open angle faces the tent, bracing the open angle of the tent peg against the tension[8].

MaterialsEdit

Peg-snow hg

A woodden tent peg used in snow.

Tent pegs may be manufactured from steel rod or wire, pressed flat steel, aluminium section, titanium alloy[9], angle iron, plastic, polycarbonate[6], polypropylene[6], polystyrene[5], or ABS plastic[5]. Steel tent pegs are typically zinc plated or stainless steel. Untreated metal tent pegs are available. Carbon fibre[9] metal tipped tent pegs are also manufactured. Wooden tent pegs are now not common, with higher strength to weight ratio, and high durability, materials being used instead.
Nuvola apps kview.svg External images
Searchtool.svg Biodegradable tent pegs used at the Glastonbury Festival.
Biodegradable tent pegs are sometimes used for special events when there is a risk that tent pegs will impact the environment.[10]

Tent pegs in history and societyEdit

Armies on the move have often used tents for sleeping accommodation overnight. A tactic used by an opposing force was too initiate an attack by riding on horse back at speed through an army's tents knocking the tent pegs out of the ground thereby collapsing tents on the enemy as they slept providing a means to hinder the enemy while a more direct attack took place. This practice has now developed into a stylised equestrian sport in various forms called tent pegging.

Improvised use of tent pegsEdit

The Book of Judges provides the story of Jael, the wife of Heber, a Kenite tentmaker in which Jael kills Sisera by driving a tent peg through his temple as he sleeps. Tent pegs have also been used as murder weapons in recent history, for example in the murder of Billie-Jo Jenkins.

Other uses of tent pegs are as improvised climbing pitons, for example in the siege of the Sogdian Rock and Jean-Christophe Lafaille's self rescue on Annapurna.

ReferencesEdit

External linksEdit


Wikipedia
Imported from Wikipedia

This page is being imported from Wikipedia, to create a Wikidwelling stub or article. These steps need to be completed:

  1. Sections not relevant to Wikidwelling can be deleted, or trimmed to a brief comment. Note: Image redlinks should not be removed
  2. Redlinks to articles unlikely to be created on Wikidwelling can be unlinked. (leave links to locations and institutions.)
  3. Categories may need to be adapted or removed - e.g. "people born in the 1940s". Redlinked categories are not a problem.
  4. Templates not used on Wikidwelling should be deleted, like all the interwiki links ({{de:...}}, {{fr:...}},
  5. When these first tasks are basically done, you can remove this template, writing {{Attrib Wikipedia | article name}} in place of this {{Attrib Wikipedia raw | article name}} at the bottom (simply remove "raw").
    You can also:
  6. Move to a section "External links" all Wikimedia project-related templates (e.g. {{Commons}}, {{Commons category}}, {{Wiktionary}}, etc. ).
  7. Add more specific content (related to the Wikidwelling topic) to the article, insert videos from YouTube, etc.

Pages with this template.


The original article was at Tent peg. The list of authors can be seen in the history for that page. The text of Wikipedia is available under the CC-BY-SA 3.0 license.


Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.